OCP S.A.F.E.™ Security Review

NetSPI » PTaaS » Hardware Systems » OCP S.A.F.E

NetSPI + Synack is now an Open Compute Project ( OCP ) S.A.F.E.™ Security Review Providers (SRP’s),  listed on the OCP Marketplace. We deliver these specialized hardware security assessments across firmware, boot chain, and physical attack resilience are evaluated by one team and documented in reports your customers can rely on.

S.A.F.E Security Reviews Backed by a Dedicated Hardware Team

NetSPI + Synack is listed on the OCP Marketplace as an OCP S.A.F.E. Security Review Provider (SRP).
Every review begins with the threat model aligned to OCP’s Common Security Threats Guidance, including security objectives, adversarial model, attack surface enumeration, and critical assets. If you have one, we gap-assess it against what your hardware and firmware actually do. If you don’t, we build it with you.

Our hardware practice covers all three OCP S.A.F.E. review scopes:

What Is OCP S.A.F.E.? An industry framework to standardize firmware and hardware security review across the data center supply chain.

OCP S.A.F.E. lets a device vendor engage a third-party Security Review Provider (SRP) to review a device and its firmware, address the findings, and publish a signed short-form report. This program acts as a clearing house for independent security reviews that allows vendors to share source code with an approved reviewer (without exposing it to competitors), and enables customers to get a common set of evidence.

Challenges Addressed

These are the program’s stated objectives, per the S.A.F.E. framework:

  • Reduce overhead and duplication of effort by providing a clearing house for independent security reviews
  • Decrease competitive objections that prevent source code sharing for independent security testing and dissemination of findings
  • Increase the number of devices whose firmware and associated updates are reviewed on a continuous basis
  • Iterative refinement of review areas, testing scopes, and reporting requirements, to advance security across the supply chain

Three Scopes of OCP S.A.F.E. Security Reviews

1 ) Code & Architecture

Whitebox review of ROM and mutable firmware covering secure boot integrity, hardcoded credentials and keys, memory safety on threat model surfaces, cryptographic construction and key handling, trust boundary violations, leftover debug handlers, CVE-bearing third party components, and exploit mitigations. We also inventory sensitive functionality (DICE, SPDM, remote update and manageability, manufacturing and diagnostic capabilities, unauthenticated APIs) so customers can make their own deployment and isolation decisions.

3 ) Physical Attack Resilience

Fault injection against the operations that matter: secure boot validation and key handling in the root of trust, using voltage, clock, and laser fault injection. We also run side-channel analysis of cryptographic blocks, including correlation power and electromagnetic analysis. This is the scope that separates a code review from a security review that requires a dedicated hardware lab, delivering the hard evidence of how the device behaves under physical attack, not only on paper.

2 ) Trust Boundaries

A deeper focus on where trust is established and enforced across the execution environment, including isolation between secure and non-secure worlds and the interfaces that cross that boundary. We review attestation and non-repudiation across boundaries, confirming that measurements and identities can be verified and that actions cannot be repudiated. Resulting in documented evidence of how privilege levels and components trust one another, so customers can judge boundaries.

Our security reviews assess your data center hardware and firmware against the Open Compute Project S.A.F.E. framework, from threat model through published report. So your devices clear hyperscaler procurement instead of stalling in it.
Hardware & Embedded Systems
OCP S.A.F.E.™ Security Review Provider

Why Choose NetSPI + Synack as your Security Review Provider Integrating S.A.F.E. Findings with a Dedicated Hardware Lab to Deliver Remediation to Retest Velocity

Our hardware team breaks embedded and connected systems across automotive, IoT, ATM, and OT hardware environments. S.A.F.E. is the framework for the review, not the limit of what we look for, depth that shows up in the 3 scopes and beyond.

  • Correlation power & electromagnetic analysis, voltage, clock, and laser fault injection, to signal analysis with high-bandwidth oscilloscopes and logic analyzers.
  • Threat modeling and secure code review are independent NetSPI + Synack practices that can be brought together on each engagement.

Hardware Lab Research Spotlight : RayV-Lite

Laser fault injection (LFI) is one of the physical attack techniques that Scope 3 of an OCP S.A.F.E. review is designed to anticipate. Traditionally, LFI labs have cost tens or hundreds of thousands of dollars. NetSPI’s hardware researchers built RayV-Lite to show that the technique can be made accessible and repeatable, and give defenders a way to test against it.

  • A consumer green laser pointer is used to emit mostly 1064 nm infrared light, which can pass through silicon and reach the transistors.
  • The OpenFlexure open-source microscope design provides a low-cost, adjustable optical path, with a spot size of roughly 0.5 to 1 micrometer depending on focus.
  • A programmable FPGA-based clock provides the timing control needed to fire the laser at a precise moment.